www.eyc-tech.com
25
modify the figure. Please check if “write-protection” is turned off if the key is not
work.
Save and return to the previous menu by pressing M.
3) Exchange between high and low level
On the main menu interface
Press Z key, and up and down arrow keys to move options. Select
“exchange between high and low level” and short press M key.
Press Z key, and up and down arrow keys to move options. Select “HL
exchange” and short press M key. If we can see √ on the right side, that will be
succeed, or we should check if the key “write-protection” is turned off.
Save and return to the previous menu by pressing M.
4) Factory reset
On the main menu interface
Press Z key, and up and down arrow keys to move options. Select
“damping time” and short press M key.
Select modifying place by pressing S key and short press Z key to
modify the figure as “88.888”.
Save by pressing M. The parameter of transmitter will be reset to the
factory defaults.
Other operation can be seen in menu structure.
In the situation of menu or parameter setting, transmitter will be
quitted from parameter configuration operation and return to the
measurement status when there is no operation for the key around 15
seconds.
