www.eyc-tech.com
2
Warning
1.
Place the transmitter horizontally before adjusting.
2.
Adjust the zero point of the transmitter after it is installed on
site.
3.
The process connection should be well installed and tightened
before the transmitter is pressurized.
4.
The transmitter should be installed in a dry environment
preventing from getting wet by rain. In harsh environments,
protection box for the transmitter should be used.
5.
It is forbidden for the user to disassemble the transmitter by
self.
6.
Do not disassemble the transmitter cover in an
explosive/flammable environment when power is on.
7.
Please check if the transmitter power supply voltage meets the
power supply voltage requirements in the manual.
8.
The external grounding screw of the transmitter should be
connected to the ground securely.
9.
The installation of the transmitter in an explosive environment
must comply with international, national and local standards,
specifications and guidelines. Please refer to the restrictions on
safe installation listed in the Explosion-proof section of the
manual.
10.
Installation and use of the intrinsically safe transmitter with
safety barrier shall be carried out according to the specific
instruction manual.
11.
When doing transmitter calibration and temperature
compensation using HART communication, use the
