Exxentric kPulley Go, Руководство пользователя, Страница: 10 / 20

10
kPulley Go Manual v1.2.1 Pulley Block Attachment
PULLEY BLOCK ATTACHMENT
Step 1
Remove the tape from the drive belt and pull out the
loose end from the body of the kPulley Go. Make sure
the belt comes out over the roller pin.
Step 2
Take the pulley block, pull the drive belt inside the
rubber and around the black wheel and then back
towards the belt stop of the kPulley Go.
Step 3
Keeping the drive belt flat, pull the drive belt through
the belt stop. Make sure to feed the belt above the
metal pin.
Step 4
Lift the pin using the two red end caps and pull the
drive belt back through the belt stop, wrapping the pin
in the belt. Pull the drive belt to make sure the belt stop
is locking the belt.