extronics iTAG, Руководство по эксплуатации

Страница: 8 / 20

8
3.3
Fuse holder
Should the fuse need replacing a fuse holder, Figure 3.3, is incorporating for simple
replacement without the need to open the Multicharger’s housing. Replace the fuse
with a good quality equivalent value. If needed check the Multicharger label for the
correct value.
Figure 3.3
3.4
Power in and daisy chain sockets
Multichargers can be daisy chained together to minimise power cables. See section 5
for further details. The daisy chain cable has an input rating of 2A at 230V and 4A at
110V. Daisy chain cables are ordered separately
– See Appendix 1.
Use only appropriately rated and approved cables in accordance with the regulations
of the country it is used in.