extronics iRFID101, Инструкция по установке и эксплуатации

Страница: 7 / 26

iRFID101 Installation and Operating Manual
7
Warning! Optical radiation hazards may be present within the iRFID101
enclosure – observe the warning labels fitted.
Warning! The iRFID101 may weigh up to 70Kg. Exercise care when
handling and mounting.
Warning! DO NOT lift the iRFID101 using the threaded entries, N-type
RF connectors or door bolts. Lift only using suitably approved
slings, fitted by suitably qualified personnel.
Important Ensure that NO TOOLS come into contact with the flamepath
of the enclosure, as this may cause irreparable damage and
render the unit unsafe.
Important Always re-apply a thin layer of Loctite 8104 or Loxeal GS9
silicone grease to the enclosure flame paths whenever the
iRFID101 flameproof enclosure is opened. This is required to
maintain the IP rating of the enclosure.
Important Do not exceed the power supply parameters specified on the
iRFID101 external rating plate.
Important Only replace the fuse with the same value and type indicated
on the internal fuse identification label.
Important Ensure that only the correct fibre transceiver format/power is
connected to the iRFID101. Damage to the iRFID101 fibre
interface or customer equipment may occur if the wrong
format/excessive optical power is used.