Panel Features
This section describes the TLP Pro touchpanels:
•
Front Panel and Enclosure Features
•
Front Panel and Enclosure Features
Figure 2 shows the TLP Pro 725C front panel and the Cable Cubby enclosure. The
TLP Pro 525C is very similar.
A
A
A
B
B
B
C
C
C
D
D
D
B
B
B
F
F
F
E
E
E
Figure 2.
TLP Pro 725C Front Panel
A
Capacitive LCD touchscreen
— made of tough, scratch-resistant, Gorilla glass.
•
The TLP Pro 725C series has a 7-inch screen with a 1024x600 resolution.
•
The TLP Pro 525C has a 5-inch screen with a 800x480 resolution
B
Motion sensor
(2) — Detects motion between three to five feet from the touchpanel, and at
least 15° from the center axis.
•
When no motion is detected for a user-defined period of time, the touchpanel enters
sleep mode.
NOTE:
For sleep mode to be activated, the sleep timer must have been set up (see
•
When motion is detected by the sensor while the display is in sleep mode, the screen
display is restored and active.
NOTES:
•
For the screen to be restored through the motion detector, wake on
motion must have been set up (see
•
If wake on motion is not activated, the screen is restored by touching it.
figure 2
LCD screen
Motion sensor
A
B
C
(see
next page)
D
E
(see next
page)
F
(see the next page)
TLP Pro 525C and 725C Series Touchpanels • Panel Features
5
