Extron electronics TLP Pro 1220MG, Руководство пользователя

Страница: 21 / 40

Setup Menu
The TLP Pro 1220, 1520, and 1720 series touchpanels can be set up by using the on-screen
setup menu. This section provides information about accessing the Setup menu and the six
sub-menus:
• Setup Menu
•
Status Screen
• Network Screen
•
Display Screen
• Audio Screen
• Input Screen
• Advanced Screen
Setup Menu
To open the setup menu, press the
Menu
button, which is located on the rear panel (see
figure 3 on page 8). In addition, the TLP Pro 1220MG, 1520MG, and 1720MG have a
recessed button, which can be accessed from under the front panel (see figure 2 on page
6). Use a small screwdriver to press the button.
The menus open at the
Status
screen. There are six different buttons in the navigation panel at
the top of the screen. These open the following screens:
• Status Screen (see the following page)
• Network Screen (see the following page)
•
Display Screen (see page 16)
• Audio Screen (see page 17)
•
Input Screen (see page 17)
• Advanced Screen (see page 19)
The button for the selected screen is yellow; the buttons for the remaining screens are black.
There is also a red
Exit
button in the top right corner of the screen. Pressing this button closes
the menu screens.
In this section, the figures show the screens for the TLP Pro 1220MG. The screens for the other
touchpanels are similar.
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Setup Menu 13