Extron electronics TLP Pro 1220MG, Руководство пользователя

Страница: 22 / 40

Status Screen
Info
Model: TLP Pro 1220MG
Part Number: 60-1340-02
Firmware
Version: 1.02.0001-b001
PoE Status: Active
Network
IP Address:
DHCP:
Host Name:
Off
192.168.254.251
TLP-AB-CD-EF
Display
Resolution:
GUI Project:
Sleep Timer: 1280x800
1280x800
5 Minutes
Audio
Master Volume:
Master Mute:
Off
100
Input
HDMI Port: No Signal
Status Display Audio Advanced Exit
Network
Input
Advanced
Controller IP: 192.168.254.250
Project Size: 1/196 MB
Bootloader
Version: 1.03.0000
XTP: 1280x720
HDCP
Figure 6. Status Screen
The Status screen is read-only. The Info panel provides basic information about the
touchpanel. Each of the other five panels shows a summary of the information on the other
screens. No values can be changed from this screen but pressing any of those five panels opens
the corresponding screen in exactly the same way as pressing the buttons in the top navigation
bar.
The green bubble shown in the
Network
panel indicates that there is a network connection. The
red square shown in the
Advanced
panel indicates that no control processor is connected.
Network Screen
The Network screen allows you to set the DHCP status and, if DHCP is set to Off , the network
addresses for the touchpanel. Verify with your network administrator whether the IP address for
the touchpanel is assigned by DHCP or set manually. If it is set manually, you need to obtain an
IP address, a subnet mask, a gateway address, and a Domain Name Server (DNS) IP address
from the network administrator.
Network Status Display Audio Input Advanced Exit
DHCP
On Off
127.0.0.1
192.168.254.251
255.255.255.0
0.0.0.0
TLP-AB-CD-EF Host Name:
IP Address:
Subnet Mask:
Gateway:
DNS Primary:
Mac Address:
Domain Name:
00-05-A6-AB-CD-EF
Apply Revert
Figure 7.
Network Screen
1. If network settings are assigned by DHCP, press
On
. The selected button is highlighted in
yellow. If DHCP is selected, you can only set the
Host Name
. All other values are set by the
DHCP server.
If IP addresses are assigned manually, press
Off
. When DHCP is off, all values except the
Host Name
can be edited.
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Setup Menu 14