Extron electronics TLI Pro 201 Скачать руководство пользователя | Manualshive

Страница: 33 / 46

background image

Using the Software

Designing a graphical user interface (GUI) for the TouchLink panel takes two steps:

1.

Design the layout of the screen text and graphics using GUI Designer.

2.

Assign functions to the text and graphics using Global Configurator.

GUI Designer

— Use the GUI Designer software to design the screen layout for the

third-party touchpanel connected to the TLI Pro 201. See the

GUI Designer Help File

for

step-by-step instructions and more detailed information.

Global Configurator

— Use the Global Configurator Plus and Professional software

to set up and configure the TLI Pro 201. See the

Global Configurator Plus and Global

Configurator Professional Help

File

for step-by-step instructions and more detailed

information. The

Global Configurator Plus and Global Configurator Professional Help File

also includes an introduction to the software and sections on how to start and configure a
project.

Global Scripter

— As an alternative to Global Configurator Plus and Professional, use

the Global Scripter software to program the TLI Pro 201, using Python 3.5 with Extron
Global Scripter modules (see the

Global Scripter Help

file for more detailed information).

Toolbelt

— The TLI Pro 201 can use the Toolbelt software for device discovery, device

information, firmware updates, and configuration of network settings (see the

Toolbelt

Help

file for more detailed information).

TLI Pro 201 • Configuration Software

25

«
...
31
32
33
34
35
...
»

Содержание TLI Pro 201















































Отзывы:

Нет отзывов

Похожие инструкции для TLI Pro 201

Бренд: Hardi Страницы: 2

Бренд: YASKAWA Страницы: 64

Бренд: V2 Страницы: 3

Univerge SV9100

Бренд: NEC Страницы: 478

Univerge UM8000

Бренд: NEC Страницы: 46

Бренд: NEC Страницы: 149

Бренд: NEC Страницы: 13

Бренд: Yudian Страницы: 26

Бренд: Watts Страницы: 12

Бренд: Lancom Страницы: 8

Бренд: Paradox Страницы: 2

disklavier DKC-850

Бренд: Yamaha Страницы: 2

Бренд: WAGNER Страницы: 60

Бренд: GEA Страницы: 13

XP-9 88-IoT Series

Бренд: ICP DAS USA Страницы: 8

Бренд: ICON Страницы: 2

Бренд: ICP DAS USA Страницы: 4

ZITON RADIO LOOP MODULE

Бренд: EMS Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды