Set the external source to Mono to All using one of these methods.
Listening Mode Preferences Tab
1.
Select the listening mode
Preferences tab
(see page 45).
2.
Select the input channel that is providing the test signal source (1-5).
3.
For whatever source format the test signal is using, select Mono to All.
4.
Return to the
Testing & Output Trim
tab and click on
Active Input
.
Override Preferences Tab
1.
Select the
Override Preferences tab
(see page 48) and select the input source.
2.
For selectable mode To All choose the override Mono to All.
3.
On the front panel of the SSP 7.1, use the Mode Override button to select To All.
Selecting speakers to be tested
The currently available speakers are displayed in a
graphics box. Speakers that are not available are
not displayed.
Click on the individual speaker to select or
deselect it from the list of speakers to be tested.
Click on
All
to select all speakers.
NOTE:
If all speakers have been selected,
clicking
All
deselects all speakers.
SSP 7.1 • Setup and Control Software
37
Содержание SSP 7.1
Страница 1: ...68 1339 01 Rev B 06 10 7 1 Channel Surround Sound Processor SSP 7 1 User Guide Audio ...
Страница 4: ......