2.
If required, attach a secondary support line.
a.
Connect a secondary support line to the support loop on the the back of the back
can, as shown here.
Anchor the end to suitable
secure points within the
solid and permanent
building structure.
Figure 20.
Connecting a Secondary Support Line
ATTENTION:
•
Do not allow any slack in the secondary support line.
•
Ne laissez pas de mou au niveau du filin de sécurité secondaire.
b.
Replace the adjacent ceiling tile that was removed in
on page 4.
3.
Repeat steps 1 and 2 for each speaker being installed.
4.
Attach the speaker assembly to the back can enclosure.
a.
Connect the speaker wires from the back can enclosure to the speaker assembly.
8Ω
8Ω
64W
32W
OF
F
8W
16W
64W 32W 16W
OF
F
100 V
70
V
Figure 21.
Connecting Speaker Wires to the Speaker Assembly
b.
Rotate the speaker assembly so that the white arrows on the back can enclosure
and the speaker assembly are aligned with each other, and insert the speaker
assembly into the back can. Make sure that the speaker wires do not get in the way
or become pinched.
SF 26CT LP User Guide • Installation in a Suspended Ceiling - Division of Labor
17
Содержание SoundField XD SF 26CT LP
Страница 6: ...SF 26CT LP User Guide Contents vi...