Extron electronics SMP 111, Руководство пользователя

Страница: 29 / 124

SMP 111 • Web-Based User Interface 21
Page Overview
The SMP 111 pages are organized by function and further organized within those main
functions. Click the tabs to open the pages.
Tabs
The pages in the SMP 111 are grouped within five main tabs at the top of the screen:
1 2 3 4 5
Figure 9. Five Main Function Tabs
1
Device Status
— This single page provides a view of the status of the input and
outputs, along with details of the active recording and stream or streams (the current
event). The URLs of the stream or streams are also displayed on this page (see
Device
Status on page 29).
2
Recorded Events — This tab features two pages that provide a calendar view of
previous and current recording events, as well as publishing configuration options (see
Recorded Events on page 30).
3
Configuration — The eight pages within this tab contain the core controls typically
needed during initial setup, or for upgrading the unit, or restoring a configuration. They
make it possible for an administrator to:
•
Configure basic AV input settings.
•
Output video test patterns for setup.
•
Save or apply EDID settings.
•
Configure output stream image settings and presets.
•
Set up AV encoding and presets.
•
Configure metadata and create recording profiles.
•
Set passwords.
•
Set up notices and alarms.
The Configuration pages also provide a way to configure basic communication,
identity, time, data storage, and recording location settings. These pages also make
it possible to update firmware, save a configuration, or restore a configuration from a
saved file (see
Configuration on page 32) .
4
File Management
— This page provides a way to view folders and files on the
internal drive and any attached external drive or drives. It also provides a way to
connect the SMP to shared network drives, and upload fonts to the SMP (see
File
Management on page 54).
5
Troubleshooting (see Troubleshooting on page 57) — The five pages within
this tab display factory-defined and user-defined information including:
•
Detailed system status and encoder status.
•
A log of events and a log of alarms with their status, which can be exported to a
CSV file.
•
Three simple diagnostic tools for checking network connections.
•
Options to perform many types of resets on the SMP.
figure 9