Extron electronics SMP 111, Руководство пользователя

Страница: 40 / 124

SMP 111 • Web-Based User Interface 32
Configuration
The eight pages within the Configuration tab contain the core controls needed during
initial setup or for upgrading the unit and restoring a configuration.
1 2 3 4 5 6 7 8
EDID
Figure 21. Configuration Tab and Subtabs
Using these pages, an administrator can:
• Configure basic AV input settings.
• Configure digital Input and Output ports.
• Output video test patterns for setup.
•
Configure output stream settings and presets.
• Set up AV encoding and metadata.
• Set passwords.
• Set up notices and alarms.
• Configure basic communication, identity, time, data storage, and recording location
settings.
•
Upgrade the unit by updating firmware.
• Save configurations or restore a configuration from a saved file.
Configuration Tab Features
The pages within Configuration include the following (see figure 21):
1
Input/Output Settings — Makes it possible to change the name for the input, select
an aspect ratio type, and enable or disable Auto‑Image , Auto Memory , and HDCP
Authorized . This page includes audio configuration controls to adjust audio levels.
It also allows the user to output one of several video test patterns for use during display
setup, select the refresh rate for the local HDMI output, configure the universal OSD
content, and select HDCP Notification (see
Input/Output Settings on the next page).
2
EDID — Makes it possible to choose the resolution and refresh rate for the HDMI input,
from a selection of common settings, as well as configure custom EDID (see EDID on
page 39).
3
Image Settings
(see
figure 21
on the previous page)— Makes it possible to configure
video input sampling and sizing, set up overscanning of SMPTE input signals, and
adjust picture controls (brightness, contrast, and the like). It also allows the user to save
or recall input presets (see
Image Settings
on page 40).
4
Encoding & Metadata — (see Encoder Settings and Metadata on page 42)
The first expandable panel in this page makes it possible to:
•
Set up AV encoding.
•
Configure the streaming method, protocol, and settings.
•
Create, save, and recall encoder and streaming presets.
The second panel contains controls that make it possible to:
•
Select fonts for metadata information.
•
Configure metadata elements.
•
Create, save, and recall recording profiles.
•
Designate a default recording profile.
figure 21