2
SMK V SB 33 Kit • Setup Guide (Continued)
3.
Place the VESA display mount on top of the L-bracket while aligning the bolt holes of the display mount with the slot of
the L-bracket and the bolt holes of the display. Repeat this procedure for the other long L-bracket on the other side of the
display.
TOP
DISP
LA
Y
(REAR)
Long L-brackets
Mounting Screws
VESA Display
Mount (not included)
Washers
Figure 2.
Installing VESA Display Mount
4.
Insert bolts through the VESA display mounts, the long L-brackets, and the display, making sure to the align the bolt holes
of the VESA display mounts with the bolt holes of the display (see figure 2). Tighten all four bolts. Spacers are provided if
needed.
5.
Position the short L-bracket under the long L-bracket that was installed in
step 4
above so that the L bends of each bracket
are paired together (see figure 3,
1
). Then install one bolt with a wingnut and lockwasher (included in the kit) so that the long
L-bracket and short L-bracket are held together. Tighten the wingnut. Repeat this procedure for the other long L-bracket on
the other side of the display.
NOTE:
The short L-bracket may be reversed if the SB 33 speaker needs to be positioned further forward relative to the
display above it (
2
).
TO
P
DISPL
AY
(REAR
)
TOP
DISPLA
Y
(REAR)
Lock
Washer
Wingnut
Short
L-bracket
Long
L-bracket
Bolt
Alternative Installation of
Short L-bracket
Short
L-bracket
(Reversed)
1
1
1
2
2
2
Figure 3.
Installing Short L-brackets on the Long L-brackets
2
3
