2.
Select the Com port to which your transmitter or receiver is connected. Click
OK
.
The FOX Extender program window appears (figure 16).
Figure 16.
FOX Extender Program Window
NOTE:
Only one fiber optic cable, transmitter-Tx-to-receiver-Rx, is required for
serial command transmission. But, if you connect only one fiber optic
cable, there will be
reduced
control program functionality on the Rx
unit. For full functionality, install both fiber optic cables and leave the
PowerCage FOX receiver in normal mode (via an
for the
PowerCage FOX 4G Rx receiver).
PowerCage FOX 4G DVI and PowerCage FOX 4G VGA • Remote Control
25
