10
NetPA AT Series User Guide • Software Installation
Software Installation
This section describes the software requirements and installation and includes the following
topics:
•
NetPA AT Software
•
Software Installation Overview
•
Software Download and Installation
NetPA AT Software
The NetPA AT has both hardware and software controls. Software configuration and
operation are accomplished using a PC running Microsoft Windows 7 or newer. Dante
Controller for Windows from Audinate is required to select and route NetPA AT digital inputs
and outputs to and from all connected Dante-compatible devices on the same network and
to rename connected devices.
To assist identification of multiple connected NetPA ATs on the network, each NetPA AT
must be renamed using Dante Controller. Dante Controller is available from the NetPA AT
product page on the Extron website (see
Software Download and Installation
on page 11).
Digital signal routing can only be done using Dante Controller from Audinate.
See
Rear Panel Features and Connections
on page 6 for additional details to connect via
the LAN port.
Software Installation Overview
Download and install the Dante Controller software program.
Download Dante Controller for Windows from the Extron website (see
Dante Controller
for Windows
on page 11).
Install Dante Controller.
Rename each NetPA AT as it is placed on the network (when there are multiple
NetPA ATs on the network) (see
Rename the NetPA AT
on page 16).
NOTE:
To avoid confusion, rename each device with a unique identifier. To simplify
renaming, connect only one device to the network at a time. As each device is
renamed, it can remain on the network.
Содержание NetPA 1001-70V AT
Страница 5: ......
