NetPA AT Series User Guide • Hardware Installation
5
Hardware Installation
This section describes the front and rear panel features and the rear panel connections and
includes the following topics:
•
Mounting the NetPA AT
•
Hardware Configuration
•
Rear Panel Features and Connections
•
Front Panel Indicators
WARNING:
May result in serious injury.
Installation and service must be
performed by authorized personnel only.
AVERTISSEMENT :
Risque potentiel de blessure grave.
L’installation et
l’entretien doivent être effectués par le personnel autorisé uniquement.
All wiring and electrical connections must conform to all applicable building codes and local
ordinances.
Mounting the NetPA AT
The 1U high, half rack width, 9.5-inch (24.1 cm) deep enclosure is designed for
inconspicuous placement.
For detailed mounting options and UL rack mounting guidelines see
Mounting of the NetPA
AT
on page 30.
Hardware Configuration
Dante Controller for Windows from Audinate is required to select and route Dante transmit
and recieve channels to all connected Dante-compatible devices (see
Dante Controller for
Windows
on page 11).
The NetPA AT has rear panel gain adjustment, a high pass filter (NetPA 1001-70V AT only), a
reset button, and several front and rear panel operational LED indicators.
A defeatable auto power-down timer ensures that the amplifier is always active for 24/7
operation in critical applications. This feature can be
enabled or disabled by setting an
internal jumper
.
Содержание NetPA 1001-70V AT
Страница 5: ......
