manualshive.com logo in svg

Extron electronics NAV E 201 D, Руководство пользователя

Поделиться
Скачать
Extron electronics NAV E 201 D Скачать руководство пользователя страница 13

NAV E 401 D and NAV E 201 D Encoders • Installation

5

 

Installation

This section describes the installation and the operation of the NAV E 401 D and 
NAV E 201 D encoders, including:

• 

Mounting and Rear Panel Connections

• 

Front Panel Features

• 

Connector and Cable Details

Mounting and Rear Panel Connections

The NAV E 401 D and NAV E 201 D encoder can be installed in the provided three-gang 
mud ring or a compatible junction box.
A decorator-style wallplate cover is supplied.
The installation must conform to national and local electrical codes and to the size 
requirements of the wall plate.

ATTENTION:

 

• 

Installation and service must be performed by authorized personnel only.

• 

L’installation et l’entretien doivent être effectués par le personnel expérimenté et 
autorisé uniquement.

• 

Extron recommends installing the encoder into a grounded, UL Listed electrical 
junction box.

• 

Extron recommande d’installer le encoder dans une boîte de dérivation électrique 
mis à la terre, certifiée UL.

• 

If the encoder will be installed into fine furniture, it is best to hire a licenced, bonded 
craftsperson to cut the access hole and perform the physical installation so the 
surface will not be damaged.

• 

S’il est prévu d’installer le encoder dans du beau mobilier, il est préférable de 
faire appel à un artisan autorisé et qualifié pour couper le trou d’accès et réaliser 
l’installation de telle façon que la surface ne soit pas endommagée.

• 

Follow all national and local building and electrical codes that apply to the 
installation site.

• 

Respectez tous les codes électriques et du bâtiment, nationaux et locaux, qui 
s’appliquent au site de l’installation.

• 

For the installation to meet UL requirements and to comply with National Electrical 
Code (NEC), the encoder must be installed in a UL Listed junction box. The end 
user or installer must furnish the junction box. It is not included with the unit.

• 

Pour que l’installation respecte les exigences UL et soit conforme au National 
Electrical Code (NEC) américain, le encoder doit être installé dans une boîte de 
dérivation certifiée UL. Il incombe à l’utilisateur final ou à l’installateur de fournir la 
boîte de dérivation. Cet équipement n’est pas inclus avec l’unité.

Содержание NAV E 201 D
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды