Extron electronics MTPX Plus Series, Руководство пользователя

Страница: 112 / 190

Programmer’s Guide, cont’d
MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide
4-18
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Lock (executive) modes
N
See “Setting the front panel locks ( Executive modes)” in chapter 3, “Operation”, for more information on the Lock
modes.
Lock all front panel functions 1X
Exe1
]
Enable Lock mode 1.
Lock advanced front panel
functions 2X
Exe2
]
Enable Lock mode 2.
Unlock all front panel
functions 0X
Exe0
]
Enable Lock mode 0.
View lock status X
X1@]
Resets
Reset all input level and
peaking adjustments
E
ZT
}
Zpt
]
Clear all level and peaking
adjustments to their default
(0) values.
Reset all input and output
skew adjustments
E
ZK
}
Zpk
]
Clear all input and output
skew values to 0 ns.
Reset global presets and names
E
ZG
}
Zpg
]
Clear all global presets and
their names.
Reset one global preset
EX2)
ZG
}
Zpg
X2)]
Clear global preset
X2)
.
Reset audio input levels
E
ZA
}
Zpa
]
Reset all audio input levels
(gain and attenuation) to 0 dB.
Reset audio output levels
E
ZV
}
Zpv
]
Reset all audio output
levels (volume) to 100% (no
attenuation).
Reset all mutes
E
ZZ
}
Zpz
]
Reset all audio or RS-232
mutes.
Reset room map
E
ZR
}
Zpr
]
Clear all room definitions.
Reset individual room
EX2@
ZR
}
Zpr
X2@]
Delete room
X2@
.
Reset all room presets and
names
E
ZP
}
Zpp
]
Clear an individual room
preset and name.
Reset individual room preset
and name
EX2@
*
X2)
ZP
}
Zpp
X2@
*
X2)]
Clear an individual room
preset and name.
Reset flash
E
ZFFF
}
Zpf
]
Reset flash memory (erase all
user-supplied files).
Reset whole switcher
E
ZXXX
}
Zpx
]
Clear all ties and presets,
reset all audio gains to 0 dB,
and reset volume to 100%.
Absolute reset
E
ZQQQ
}
Zpq
]
Similar to Reset whole
switcher , plus clear the IP
address to 192.168.254.254
and subnet mask to
255.255.000.000.
N
X1@
= Lock mode 0 = mode 0
1 = mode 1
2 = mode 2
X2)
= Global or room preset # 0 - 32, 10 maximum for a room preset (0 = current configuration)
X2@
= Room # (for room presets) 10 max. (each can have up to 10 presets (
X2)
s) assigned)