Extron electronics MTPX 1616 Скачать руководство пользователя страница 43

Страница: 43 / 124

3-17

MTPX Twisted Pair Matrix Switchers • Operation

PRELIMINAR

Viewing a configuration

The current configuration can be viewed using the front panel buttons. The

View-only

mode prevents inadvertent changes to the current configuration.

View-only

mode also provides a way to mute audio or RS-232 outputs (see “Muting

and unmuting audio/RS-232 outputs” on page 3-20).
View the current configuration as follows:

Press the Esc button to clear any input LEDs, output LEDs, or control LEDs

that are lit.

Press and release the View button. Output LEDs light for all of the outputs

that are

not

tied.

Select video, audio, or both by pressing the Video button and/or the Audio

button.

Select the desired input or output(s) whose ties you wish to view by pressing

the input and output buttons.

• When you enter

View-only

mode, the output LEDs light for all outputs

without

ties. Likewise, when an output button for which there are no ties is

pushed, the output LEDs turn on for all outputs without ties.

• To see all ties of the current configuration, press and release each input and

output button, one at a time, with the Video LED and the Audio LED lit.

• In View-only mode, you can view video and audio, video-only, or audio-only

ties. Pressing and releasing the Video button and the Audio button toggles
each on and off.

• After 30 seconds of front panel inactivity,

View-only

mode automatically

deselects.

Example 4: Viewing video and audio, audio only, and video only ties

The following steps show an example of viewing the video and audio, audio-only,

and video-only ties in the current configuration. The steps show the front panel

indications that result from your action.

This example assumes that you have performed example 1, example 2, and

example 3.

Press and release the Esc button (figure 3-22).

ENTER PRESET VIEW

ESC

CONTROL

Press the Esc button to clear all selections.

The LED
blinks once.

Figure 3-22 — Clear all selections

Press and release the View button to enter

View-only

mode. The View LED

lights.

Содержание MTPX 1616





























































































































Результаты поиска

Содержание MTPX 1616

Отзывы:

Похожие инструкции для MTPX 1616

Бренды по названию

Популярные бренды

Extron electronics MTPX 1616, Руководство пользователя

Результаты поиска

Содержание MTPX 1616

Отзывы:

Похожие инструкции для MTPX 1616

Бренды по названию

Популярные бренды