6-15
MPX 866 A Media Presentation Matrix Switcher • HTML Operation
PRELIMINAR
Y
Change the output volume level
Users can set each output’s volume level through a range of zero steps of
attenuation (full attenuation, minimum volume) to 64 steps of attenuation (no
attenuation, full volume) from the RGB and Audio Settings page.
Change an output’s audio level setting as follows:
1.
Click the output drop box. A drop down scroll box appears (fi gure 6-15).
Figure 6-15 — Output selection drop box
2.
Click the desired output.
3.
Click the Volume Steps (64 Max) drop box. A drop down scroll box appears
(fi gure 6-16).
Figure 6-16 — Volume drop box
4.
Click and drag the slider or click the scroll up button or scroll down
button until the desired audio volume is visible.
5.
Click the desired output volume step value.
N
The table on the next page defi nes the value of each audio volume step.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
