IN1403 User’s Manual
25
Problem: The image on the display device is cropped on the right side.
•
Solution 1:
Reduce the output H-Position to line up the image on the display device.
Use the blue screen.
•
Solution 2:
Adjust the monitor position or size controls to fit the image on the display
device. Use the blue screen.
Problem: The image on the display device is cropped on the top.
•
Solution 1:
Increase the output V-Position to line up the image on the display device.
Use the blue screen.
•
Solution 2:
Adjust the monitor position or size controls to fit the image on the display
device. Use the blue screen.
Problem: The image on the display device is cropped on the bottom.
•
Solution 1:
Reduce the output V-Position to line up the image on the display device. Use
the blue screen.
•
Solution 2:
Adjust the monitor position or size control to fit the image on the display
device. Use the blue screen.
Problem: The display device has a double image.
•
Solution:
The IN1403 cannot separate multiple signal formats. Make sure that only one
signal is connected to each input.
Problem: The image on the display device is black & white (no color).
•
Solution:
Set the input signal format to match the input signal connected to the rear of
the unit.
Problem: The picture on the display device has hooking along the top.
•
Solution 1:
Increase the input horizontal tracking to compensate for poor quality video
signals, such as from a VCR.
•
Solution 2:
The display device may need different sync serrations. Choose a different
output sync from the sync format menu.
Problem: The image is frozen.
•
Solution:
Freeze is activated. Press
FREEZE
to deactivate the freeze frame feature.
Problem: The image on the display device is the wrong shape.
•
Solution:
The input aspect ratio is set incorrectly. Adjust the input aspect ratio to match
the input video signal.
Problem: The image on the display device appears fuzzy.
•
Solution 1:
Adjust the video sharpness until the image regains its detail.
•
Solution 2:
Adjust the video noise filter until the image is sharp.
•
Solution 3:
Change the comb or trap filter setting (applicable only in composite video
mode).
Problem: The Output Resolution will not decrease.
•
Solution:
The IN1403 can
only
scale up. Resolutions that would result in scaling down
are not available.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203