1
IMPO
RTAN
T:
IMPO
RTAN
T:
Go to www
.extron.com f
or the complete
user guide
, installation instructions,
and
specifications bef
ore connecting the
product to the po
wer sour
ce.
FOX3 T/R 301 and FOX3 T/R 311 • Setup Guide
This guide provides quick start instructions for an experienced installer to set up and operate the Extron FOX3 T/R 301 and
FOX3 T/R 311 Fiber Optic transmitters and receivers.
WARNING:
The FOX3 T/R 301 and FOX3 T/R 311 outputs continuous invisible light (Class 1 rated), which may be harmful to
the eyes; use with caution. Plug the attached dust caps into the optical transceivers when the fiber cable is unplugged.
CLASS 1 LASER PRODUCT
, see the
FOX3 T/R 301 and FOX3 T/R 311 User Guide
, at
www.extron.com
.
AVERTISSEMENT :
Le FOX3 T/R 301 and FOX3 T/R 311 émet une lumière invisible en continu (conforme à la classe 1)
qui peut être dangereux pour les yeux, à utiliser avec précaution. Branchez les protections contre la poussière dans
l’ensemble émetteur/récepteur lorsque le câble fibre optique est débranché.
Produit laser de classe 1
, voir le
FOX3 T/R 301 and FOX3 T/R 311 User Guide
sur
www.extron.com
(en anglais)
.
NOTE:
The front and rear panels for the FOX3 T 301 and FOX3 R 301 are shown in this guide. Some of the features on the
FOX3 301 transmitter and receiver are not available on the FOX3 311 transmitter and receiver. See the
FOX3 T/R 301 and
FOX3 T/R 311 User Guide
to see the front and rear panels for the FOX3 T 311 and FOX3 R 311.
Installation
Step 1 — Mounting
Turn off or disconnect all equipment power sources and
mount the transmitter as required. For mounting details and
considerations, see the
FOX3 T/R 301 and FOX3 T/R 311
User Guide
.
Step 2 — Input and Output Connections
a.
Connect an HDMI video source to the HDMI input (see
figure 1,
H
) on the transmitter.
b.
If desired
, connect an HDMI video display to the
Loop Out port (
I
) for a local display.
c.
Connect an HDMI display to the HDMI output (
J
) on
the receiver.
d.
Connect an audio input device to the Audio 5-pole
captive screw port (
D
) on the transmitter (see figure 2
to wire the captive screw connector).
e.
Connect an audio output device to the Audio 5-pole
captive screw port (
E
) on the receiver (see figure 2 to
wire the captive screw connector).
f.
For optional returned audio (
C
)
(see figure 2 to wire
the captive screw connector):
•
Connect an audio output device to the Audio
Return 5-pole captive screw port on the transmitter.
•
Connect an audio input device to the Audio Return
5-pole captive screw port on the receiver.
ATTENTION:
•
For unbalanced audio, connect the sleeves
to the ground contact. DO NOT connect the
sleeves to the negative (–) contacts.
•
Pour l’audio asymétrique, connectez les
manchons au contact au sol. Ne PAS
connecter les manchons aux contacts négatifs
(–).
60-60 Hz
100-240V
~
0.7A MAX
L
R
L
R
RS-232
Tx Rx
Tx Rx
G
IR
A
OUT
R
IN
OUTPUTS
AUDI
O
RETURN
INPUTS
CONTROL
B
OUT IN
USB 2.0
AUDIO
FO
X3 R 301
LAN
1
1
2
HDMI
DEVICES
USB HID
100 mA
500 mA
REMOTE
RS-232
Tx Rx
S 5V
G
3D
SYNC
60-60 Hz
100-240V
~
0.7A MAX
L
R
L
R
RS-232
Tx Rx
Tx Rx
G
IR
A
OUT
R
IN
INPUTS
AUDIO RETURN
OUTPUTS
CONTROL
B
OUT IN
HDMI
LOOP OUT
USB HID
USB 2.0
AUDIO
FO
X3
T 301
LAN
HOST
HOST
REMOTE
RS-232
Tx Rx
S 5V
G
3D
SYNC
1
J
F
F
F
O
O
O
N
N
N
M
M
M
K
K
K
C
C
C
B
B
B
A
A
A
D
D
D
G
G
G
L
L
L
E
E
E
H
H
H
I
I
I
J
J
J
Power Inlet
I
HDMI Loop Out
Power LED
J
HDMI output (receiver)
C
Audio Return
Remote RS-232/3D Sync port
D
Audio input (transmitter)
Control RS-232/IR port
E
Audio output (receiver)
LAN Ethernet port
USB Host ports
SFP module and LEDs
USB Hub ports
O
Reset button
H
HDMI input (transmitter)
Figure 1.
FOX3 T/R 301 Rear Panels
Unbalanced Stereo Output
Balanced Stereo Output
Unbalanced Stereo Input
Balanced Stereo Input
Do not tin the wires!
Tip
No Ground Here
No Ground Here
Tip
LR
Sleeves
Tip
Ring
Tip
Ring
LR
Sleeves
Tip
Ring
Tip
Ring
LR
Sleeves
Tip
Sleeve
Sleeve
Tip
LR
Figure 2.
Audio Wiring Diagrams
1
2
