Stage 4 — Connect the VLR 102 Receiver to the PoleVault System
c
Pull the cables to the receiver
(page 29).
c
Connect the cables to the receiver
(page 29).
c
Attach the receiver dome to the housing
(page 30).
c
Pull the cables to the PoleVault switcher
(page 31).
c
Connect the cables to the PoleVault switcher
(page 32).
Stage 5 — Configure and Test the System
c
Set up the microphones
(page 33).
c
Set the microphone gain and feedback suppressor (FBS)
(page 34).
c
Complete the installation
(page 36).
Installation Procedures
The following sections contain instructions for installing the VoiceLift System. Where
possible, line drawings and photos from an actual installation are used to clarify some of
the steps discussed in the text. Each image has a circled number corresponding to the
step that is being described.
NOTES:
•
Additional installation hardware is needed for this installation and should be
supplied by the installer (see
Items Not Included
on page 12 for a list of items
that you may need).
•
Consider optional accessories for this installation (see
Optional Items
on
page 12 for a list of available accessories, or visit
www.extron.com
for details).
•
See local building standards and codes to verify that the installation will meet
all the regulatory requirements. Observe all local and national building and
safety codes, UL requirements, and ADA Accessibility Guidelines.
•
Before beginning the installation, be sure to check the contents of your
VoiceLift packages against the appropriate
inventory list
, beginning on page 9,
to ensure that you have received all of the necessary components.
VoiceLift System with PVS 405D Installation Guide
•
Installation — Overview
14