Installation
Overview
This section provides an overview of the five stages of installation for the VoiceLift
system and the steps required for each stage.
Stage 1 — Install the VLR 102 Receiver
Choose one of these installation types:
1a. Drop ceiling
c
Cut a hole in the ceiling tile
(page 17).
c
Mount the receiver housing to the ceiling tile
(page 17).
c
(Optional)
Attach a conduit to the back plate if needed
(page 17).
1b. Junction box
c
Install the junction box
(page 18).
c
Attach the receiver housing to the junction box
(page 18).
c
Attach a conduit to the junction box if needed
(page 18).
1c. Wall or other hard surface
c
Install a raceway if needed
(page 19).
c
Mark the mounting screw hole locations on the surface
(page 19).
c
If using a raceway, remove the appropriate knockout in the receiver
housing
(page 19).
c
Mount the receiver housing to the surface
(page 20).
1d. Pole
c
Attach the pole to the ceiling
(page 21).
c
Mount the receiver housing to the pole
(page 21).
Stage 2 — Install the FF 120 Speakers (VLS Only)
c
Cut the ceiling tile
(page 23).
c
Install the speakers in the drop ceiling
(page 23).
c
(Optional)
Install a seismic safety cable at each speaker location
(page 24).
c
Terminate the speaker cable for the PVS switcher
(page 24).
Stage 3 — Install the PVS 405D Switcher (VLS Only)
c
Install the PoleVault switcher
(page 26).
See the
PoleVault Systems Featuring the PVS 405D Switcher Installation Guide
for the procedures.
VoiceLift System with PVS 405D Installation Guide
•
Installation — Overview
13