Extron electronics DVS 605, Руководство пользователя, Страница: 99 / 133

DVS 605 • Product Configuration Software 91
To set the front panel lockout mode, click the applicable
Front Panel Lockout
(Exec Mode)
radio button (see figure 64 ,
6
on the previous page) as desired.
•
Unlock Front Panel
• Mode 1: Lock Front Panel
• Mode 2: Limit Front Panel to Input Selection, Auto-Image, PIP and
Swap
To enable on screen display (OSD) selection, check the Enable On Screen Display
(OSD) checkbox (
7
) and then set the duration for the display to remain on screen
(1-500 seconds) . To disable OSD selection, uncheck the Enable On Screen Display
(OSD) checkbox.
To enable auto input selection, check the Auto Switch checkbox (
8
) and then click
the applicable radio button to set the priority to the highest active input number or the
lowest active imput number. To disable auto input selection, uncheck the
Auto Switch
checkbox.
To enable or disable IR control, check the IR Control checkbox (
9
).
Software Menu
The
Software
menu (see figure 65,
1
, accessible at the top right corner of the PCS
window) contains options to display device connection methods in the device tabs,
re-enable confirmation dialogs, and view software information.
1
2
3
4
5
6
7
Figure 65. Software Menu
Show Expanded Device Tabs
This option displays the device IP address or connection method on the Device tab.
From the Software menu, select Show Expanded Device Tabs (
2
).
Figure 66. Expanded Device Tab
Software Settings
This option resets all disabled confirmation dialogs to the default settings.
1.
From the
Software
menu, select Software Settings (
3
). The
Software Settings
dialog box opens.
65
66