Extron electronics DVS 605, Руководство пользователя, Страница: 98 / 133

DVS 605 • Product Configuration Software 90
General Settings Page
The General Settings page allows the user to set a screen saver, select HDCP
notification and HDCP Mode options, set the front panel lockout mode (Exec Mode), enable
on-screen input information, and enable or disable auto input selection and IR control. In
addition, it gives access to the
Hardware Settings page.
Click the General Settings icon (see figure 64,
1
) on the global navigation bar to open
the General Settings page.
1
2
3
4
5
6
7
8
9
Figure 64. General Settings Page
To open the Hardware Setting page, click the Hardware Settings button (
2
). The
Hardware Settings
page opens (see the DVS 605 Product Configuration Software Help
file for details).
To set the screen saver, click the desired radio button (
3
, Black or Blue with On
Screen Display (OSD) Bug ). To disable sync after a specified time, select the Disable
Sync After checkbox, and set the duration in seconds (0-500). To do this either enter
a new value in the field or click the Up or Down arrows to increase or decrease the time
duration. Then, press the < Enter > or < Tab > key to apply the changes.
To set HDCP Notification screen saver,
click the desired radio button (
4
, Black or
Green ).
To set HDCP mode, click the desired radio button (
5
), from:
• Follow Input — Encrypts the output only when required by the selected input source.
• Always Encrypt Output — Always encrypts the output, regardless of the HDCP
status of the selected input source.
• Follow Input (with continuous DVI trials) — Encrypts the output only when
required by the selected input source. Use this setting when DVI sink devices initially
pass HDCP encrypted content, but intermittently display a green HDCP notification
screen after a power cycle or resuming from sleep mode.
•
Always Encrypt Output (with continuous DVI trials) — Always encrypts
the output regardless of the HDCP status of the selected input source. Use this setting
when DVI sink devices initially pass HDCP encrypted content, but intermittently display
a green HDCP notification screen after a power cycle or resuming from sleep mode.
64