Extron electronics DVS 605, Руководство пользователя, Страница: 79 / 133

DVS 605 • Product Configuration Software 71
3. Click the Open Backup File button (
3
) on the
Restore To Multiple Devices
dialog box. An
Open Backup File
window opens.
4. In the
Open Backup File
window, browse to the saved backup configuration.
5. Select the applicable configuration file (with a .extz extension) and click Open .
6. In the Restore to Multiple Devices dialog box, click Restore (see figure 44 ,
4
on the previous page) to upload the file to the listed DVS 605 devices.
The window closes after restoring, and a confirmation pop-up is shown briefly to
indicate the process is complete.
7. When restoring is completed, click the Close button. If the list has not been saved, you
are prompted to save the list.
For editing settings, deleting, saving, and opening list of target devices, see the
DVS 605 Product Configuration Software Help file within the PCS software.
Update Firmware
This option uploads firmware from the host device (PC) to the connected DVS 605 device or
to multiple DVS 605 devices.
NOTE: If necessary, download new firmware from the Extron website to the PC first.
To update firmware to a single device:
1. Connect to the DVS 605 device via LAN to the PC where the firmware file resides.
2. Select Update Firmware (see figure 37 on page 66,
6
) and then Update
Firmware this Device... from the
Device
drop-down menu. A dialog box opens
to ask permission to disconnect from the device.
3. Click the Continue button to disconnect from the device and continue with the
firmware update process.
The
Update Firmware to This Device dialog box opens.
1
2
Figure 45. Update Firmware to This Device Dialog Box
4. Click the Open Firmware File button (see figure 45,
1
).
5. Navigate to the desired firmware file and select the device-specific firmware file. Valid
firmware files have an .eff or .esf file extension.
6. Click the Open button. This returns you to the Update Firmware dialog box.
7. In the Update Firmware dialog box, click Update (
2
). The progress bar shows the
progress of the firmware upload to the device.
To update firmware to multiple devices:
1. Connect the host PC to all the target DVS 605 devices on the same network via LAN.
2. Select Update Firmware and then Update Firmware To Multiple Devices...
from the device drop-down menu. An Update Firmware To Multiple Devices
window opens (see figure 46 on the next page). In this window the target devices can
be added.
45