Extron electronics DVS 605, Руководство пользователя, Страница: 80 / 133

DVS 605 • Product Configuration Software 72
To add devices to the list:
a. Enter the IP address , Password , Telnet port details in each field for a desired
target device (see figure 46,
1
).
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset,
the passwords convert to the default, which is no password.
b. Click Add (
2
). The list is populated with the device details.
c. Repeat the above steps for each desired target device.
1
2
3
4 5
Figure 46. Update Firmware to Multiple Devices Window
Once the list is completed, individual targets can be selected or deselected for
updating. As default, all targets are preselected for deployment and have a check mark
to the left of the device details list.
NOTE: When updating the firmware, PCS verifies the correct DVS 605 model,
Telnet port, IP address, and administrator password for each device in the list.
PCS does not update firmware on a device if one of the above criteria is not valid,
as reflected in the
Status
column. If needed, click the
Edit logo
to correct the
settings. A
Device not found
status is returned if a device is not connected, not
powered or turned off.
3. Click the Open Firmware File button (see figure 46,
3
) on the
Update Firmware
To Multiple Devices
window (upper left). The
Update Firmware
dialog box opens.
4. Click the Browse button.
5.
Navigate to the desired firmware file and select the device-specific firmware file. Valid
firmware files have an .eff or .esf file extension.
6. Click the Open button. This returns you to the
Update Firmware
dialog box.
7. In the Update Firmware dialog box, click Update (
4
). The progress bar shows the
progress of the firmware upload to the devices. The dialog box closes after updating,
and a confirmation pop-up is shown briefly to indicate the process is complete.
8. When updating is completed click the Close button (
5
). If the list has not been saved,
you are prompted to save the list.
For editing settings, deleting, saving, and opening list of target devices, see the
DVS 605 Product Configuration Software Help
file within the PCS software.
46