DVS 510 Series • Remote Configuration and Control
69
Symbol Definitions for IP-specific SIS Commands
•
= Space
]
= Carriage return with line feed
}
= Carriage return with no line feed
|
= Pipe (vertical bar) character. For URL-encoded commands, has the same function
as
]
.
E
= Escape
W
= For URL-encoded commands, has the same function as E
14,
24,
27,
28
= Superscripts indicate the error message displayed if the command is entered
incorrectly or with invalid parameters (see
on page 51).
X!
= Input selection
1
through
10
X1)
= On and off
0
= Off or disable
1
= On or enable
X7!
= Port number
01–99
(represented as two ASCII characters with leading zero if required)
X7@
= Command data section
Factory default name (model name + last three pairs of MAC address)
X7#
= GMT offset
–12.0 t14.0. Represents hours and minutes offset from Greenwich mean
time (GMT).
X8!
= Firmware version number
n.nn
(listed to two decimal places)
X8@
= Unit name
Up to 24 characters: alphabetical (
A–Z
or
a–z
), digits (
0
–
9
), or hyphen (
-
).
NOTES:
•
The following characters are invalid or not recommended in names:
{space}
+ ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \
and
?
.
•
The first character must be alphabetical.
•
The last character must
not
be a hyphen.
