Extron electronics DTP2 T 201 D, Руководство пользователя

Страница: 23 / 35

DTP2 T 201 D Transmitter • Installation and Operation 15
The next screen of the Wizard opens:
1 1
2 2
Figure 13. Installing the Software Automatically
4. Select Install the software automatically (Recommended) radio button (see
figure 13,
1
).
5. Click Next (
2
).
NOTE: You do not need to insert an installation disc.
The PC locates the driver needed and installs it in the correct location on the hard drive.
6. When the
Completed
screen appears, click Finish to close the wizard.
NOTE: The wizard opens only on the first occasion you connect the transmitter to
that USB port. The wizard reappears if you connect the unit to a different USB port
or if you connect a different piece of equipment, requiring a different driver, to the
same USB port.
7. Configure the transmitter using SIS Commands (see Remote Configuration and
Control starting on page 16).
Resetting
Use the SIS command to reset the transmitter to its factory default settings (see
Reset
on
page 19).
13