DTP T EU 4K 331, DTP T EU 4K 231, DTP T MK 4K 331, and DTP T MK 4K 231 • Installation and Operation
15
Front Panel Connection
HDMI IN
B
A
Figure 9.
Front Panel HDMI Connection and Indicator
A
HDMI input port
— Connect a digital video source to the transmitter via
HDMI IN
this HDMI connector. It accepts HDMI, and can also accept a DVI or dual
mode DisplayPort video source with an appropriate adapter.
NOTE:
The maximum HDMI cable length is 4.5 m (15 feet).
Operation
Plug in all system components and turn on the input device (such as a Blu-Ray player or
computer) and the output device. Set the input devices to output video using the operating
instructions of that device. The image should appear on the screen. If no image appears,
see “Troubleshooting — If no Image Appears,” below.
Indications
B
Power ( ) LED
— Lights to indicate power and signal status:
Amber
— The transmitter is receiving power from either the connected DTP receiver or
a local power supply. No digital video signal is input.
Green
— The transmitter is receiving power and is detecting TMDS on the HDMI input
connector.
Troubleshooting — If no Image Appears
1.
Ensure that all devices are plugged in and powered on.
2.
Ensure an active input is applied to the transmitter. The transmitter is receiving an active
input if the power LED is lit green.
3.
Ensure that the proper signal format is supplied.
4.
Check the cabling and make corrections as necessary.
5.
Call the Extron S3 Sales & Technical Support Hotline if necessary. See the
end
of this
guide for the phone number in your region of the world.