Extron electronics DTP CrossPoint 84, Руководство по установке

Страница: 13 / 34

DTP CrossPoint 84 • Installation 5
Video Inputs and Outputs
A
HDMI Inputs 1 through 6 — (see figure 2 on page 4) Plug HDMI digital
video (or DVI with appropriate adapters) into these HDMI ports. See HDMI
connectors on page 8 to secure the connector to the board with a LockIt
HDMI Cable Lacing Bracket.
B
TP (
XTP/DTP) switches, inputs 7 and 8 —
XTP
DTP
ATTENTION:
• Position this switch BEFORE connecting the appropriate device to the
TP connector. Failure to comply can damage the endpoint.
•
Positionnez le sélecteur AVANT de connecter l’appareil approprié au
connecteur TP. Ne pas respecter cette procédure pourrait endommager
le point de connexion.
XTP position — Select if the transmitting device is an Extron XTP matrix switcher. The
input is HDMI with embedded audio plus RS-232 and IR.
DTP position — Select if the transmitting device is an Extron DTP device. The input is
HDMI with embedded audio, analog audio, RS-232 and IR, and remote power.
C
TP Inputs 7 and 8
— Plug compatible Extron DTP or XTP signals into these
SIG LINK
IN
RJ-45 ports using STP cables. See TP connectors on page 8 to wire the
connectors.
ATTENTION:
• Do not connect this port to a computer data or telecommunications
network.
• Ne connectez pas ces port à des données informatiques ou à un réseau de
télécommunications.
SIG LINK
OUT
1 3 4 4
XTP
RS-232 IR
Tx Rx Tx Rx
XTP
S/PDIF
OUT
DTP
HDBT G
DTP
HDBT
2
RS-232 IR
Tx Rx Tx Rx G
OVER TP
OUTPUT
S
SIG LINK
OUT
Figure 3. Video Output Features
D
HDMI Output 1 and 2
— Plug HDMI video displays (or DVI with appropriate
adapters) into these ports. See HDMI connectors on page 8 to secure the
connector to the board with a LockIt HDMI Cable Lacing Bracket.
E
TP (XTP/HDBT/DTP) switches, outputs 3 and 4
—
XTP
DTP HDBT
ATTENTION:
• Position this switch
BEFORE
connecting the appropriate device to
the TP connector. Failure to comply can damage the endpoint.
•
Positionnez le sélecteur AVANT de connecter l’appareil approprié au connecteur
TP. Ne pas respecter cette procédure pourrait endommager le point de
connexion.
XTP position — Select if the receiving device is an Extron XTP matrix switcher. The
output is HDMI with embedded audio plus RS-232 and IR.
HDBT position — Select if the receiving device is a HDBaseT-enabled device. The
output is HDMI with embedded audio plus RS-232 and IR.
DTP position — Select if the receiving device is an Extron DTP device. The TP output
is compatible with a DTP receiving device and consists of HDMI with embedded audio,
analog audio, RS-232 and IR, and remote power.
HDMI Inputs 1-6
TP (XTP/DTP)
TP Inputs 7 and 8
3
HDMI Output 1 and 2
Output TP switches