DTP Crosspoint 84 IPCP Series Matrix Switchers • Programming Guide
6
Command and Response Table for Matrix Switcher Commands
Symbol definitions
]
= Carriage return and line feed
}
= Carriage return (no line feed)
|
= Pipe (can be used interchangeably with the
}
character)
•
= space
E
= Escape key
W
= Can be used interchangeably with the
E
character
X!
= Input number
00
–
08
(
00
= untied input, valid for tie commands only)
X@
= Output number
00
–
04
(
00
= untied output, valid for tie commands only)
X#
= EDID value (resolution and rate)
See
table 1
on page 10.
X$
= EDID filename
nnnnn
.bin.
Can include a full path name. File carries 128 or 256 bytes of data.
X%
= Enable or available
0
= Disable or not available
1
= Enable or available
X^
= Input audio source
0
= Auto (see the example on
page 11
)
1
= HDMI (de-embedded digital audio) (
default
)
2
= Analog 2-channel audio
X&
= Output audio source
0
= Original HDMI audio
1
= Embed audio
2 = None
X*
= Detected input audio format
0
= None
2
= 3-channel or bitstream
1
= 2-channel
X(
= HDCP authorized device
0
= Off
1
= On (
default
)
X1)
= HDCP output
0
= Auto
1
= On (always encrypted)
X1!
= HDCP status (for inputs)
0
= No source device connected
2
= Source connected is not HDCP-compliant
1
= Source connected is HDCP-compliant
X1@
= HDCP status (for outputs)
0
= No monitor connected
1
= Monitor connected but does not support HDCP
2 = Monitor connected, supports HDCP, but the video signal is not encrypted
3
= Monitor connected, supports HDCP, and the video signal is encrypted
X1#
= Video format
0
= Auto (HDMI RGB Full to CEA sink or DVI to non-CEA sink)
1
= DVI (RGB 444, no audio, no InfoFrames)
2
= HDMI RGB Full (RGB 444, 000 - 255 audio, InfoFrames)
3
= HDMI RGB Limited (RGB 444, 016 - 255 audio, InfoFrames)
4
= HDMI YUV Full (RGB 444, 000 - 255 audio, InfoFrames)
5
= HDMI YUV Limited (RGB 444, 016 - 255 audio, InfoFrames)
6
= HDMI YUV Full (RGB 422, 000 - 255 audio, InfoFrames)
7
= HDMI YUV Limited (RGB 422, 016 - 255 audio, InfoFrames)
X1$
= Output video bit depth
0
= Auto (
default
)
1
= 8-bit
X1%
= Video mute status
0
= No mutes
2
= Video and sync
1
= Video mute
X1^
= Input signal status
0
= No signal detected
1
= Sync detected
X1&
= TP and insertion input number
07
or
08
X1*
= Switch position
0
= DTP
1
= HDBT (output only)
2
= XTP
X1(
= TP (scaled) and insertion output number
03
or
04
X2)
= Name
12 characters maximum
upper- and lower-case alphanumeric characters and _ / and spaces are valid.
NOTE:
T
he HTML language reserves certain characters for specific functions (see
Special Characters
on page 20).
X2!
=
Lock
mode
0
= Mode 0
1
= Mode 1
2
= Mode 2 (
default
)
X2@
= Scaler preset
001
–
128
X2#
= Firmware version number to second decimal place
(x
.
xx
)
X2$
= Verbose firmware version-description-upload date/time (see the
Query firmware version (verbose)
command on page 14).
X2%
= Voltage
Positive or negative voltage and magnitude
X2^
= Internal temperature
Degrees Celsius
X2&
= Fan speed
RPM
X2*
= Picture adjustments
000
through
127
(
064
=
default
)
