Extron electronics DTP CrossPoint 4K Series, Руководство по установке

Страница: 25 / 44

DTP CrossPoint 4K Series • Front Panel Operations 17
Front Panel Operations
This section describes simple DTP CrossPoint matrix switcher
operation from the front panel. Topics that are covered include:
• Creating a Tie
•
Recalling a Preset
•
Viewing Ties
•
Assigning a Logo to an Output
•
Viewing and Adjusting Volume and Mic Volume
•
Setting the Front Panel Locks (Executive Modes)
Creating a Tie
NOTES:
•
"Tie" is an input-to-output connection.
•
"Set of ties" is an input tied to two or more outputs. (An
output can never be tied to more than one input.)
•
"Coniguration" is one or more ties, one or more sets of ties,
or a combination.
1.
Press and release the
Esc
button to clear any input button,
output button, or control button indicators that may be lit.
2.
Press and release the
Video
and
Audio
I/O buttons to select or
deselect video, audio, or both as desired.
I / O
VIDEO AUDIO
Green when selected
Off when deselected
Red when selected
Off when deselected
NOTE:
Audio or video can be broken away (tied by itself)
by selecting only the
Video
button or only the
Audio
button.
3.
Press and release the desired input button.
5
The button lights to indicate the selection.