Extron electronics DSC HD-HD Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Extron electronics DSC HD-HD Скачать руководство пользователя страница 7

Introduction

This section provides an overview of the DSC HD-HD scaler, covering the following topics:

•

About this Guide

•

About the DSC HD-HD

•

Features

•

Application Diagram

About this Guide

The

DSC HD-HD User Guide

describes the Extron DSC HD-HD Scaler and provides

instructions for experienced installers to install, configure, and operate it.
In this guide the terms “scaler” and “DSC” are used interchangeably to refer to the
DSC HD-HD.

About the DSC HD-HD

The DSC HD-HD is a single input and output, HDCP compliant, HDMI-to-HDMI scaler
that accepts multiple video resolutions and offers multiple output rates. It provides
30-bit processing and 1080i, 576i, and 480i deinterlacing, as well as embedded audio.
Configuration and control are provided via front panel controls with an on-screen display
(OSD) and a front panel USB Config port. Simple Instruction Set (SIS) commands and the
Windows

®

-based configuration software can be used to communicate with the DSC via

the front panel Config port.
The DSC HD-HD accepts computer and SMPTE video resolutions up to 1920x1200,
1080p @ 60 Hz, and 2K, with output rates from 480p to 1920x1200, including HDTV
1080p @ 60 Hz, and 2K. It can embed two-channel or multi-channel HDMI audio in the
output.
The unit has a compact 1 inch (2.54 mm) high by a quarter-rack wide by 6 1/2 inches
(21.5 cm) deep enclosure and can be rack or furniture mounted.

Features

•

HDMI video cross conversion

— Provides high quality scaling and conversion of

HDMI video resolutions and frame rates.

•

Input and output connectors

— One female HDMI input and one female HDMI

output connector

•

Advanced scaling engine

— Performs image scaling and video format conversion

at 30-bit precision for enhanced color accuracy and picture detail. High performance
deinterlacing for 480i, 576i, and 1080i signals from HD sources delivers optimized
image quality.

•

Accepts multiple HDMI signal formats

— Accepts HDMI signals with resolutions

up to 1920x1200, 1080p @ 60 Hz, and 2K, and is compatible with standard
definition and high resolution video.

DSC HD-HD • Introduction

1

«
...
5
6
7
8
9
...
»

Содержание DSC HD-HD













































Отзывы:

Нет отзывов