manualshive.com logo in svg

Extron electronics DSC HD-HD, Руководство пользователя, Страница: 13 / 44

Поделиться
Скачать
Extron electronics DSC HD-HD Скачать руководство пользователя страница 13

Select one of the following radio buttons, then click the 

Next

 button:

• 

Select the 

Yes,

 

this

 

time

 

only

 radio button if you want your computer to 

connect to Windows Update only this one time.

• 

Select 

Yes,

 

now

 

and

 

every

 

time

 

I

 

connect

 

a

 

device

 if you want the 

computer to automatically connect to Windows Update every time the DSC 
is connected to this USB port. 

• 

Select 

No,

 

not

 

this

 

time

 if you do not want the computer to connect to 

Windows Update at this time (for example, if the driver is already installed). 

NOTE:

  This wizard appears only the 

first

 time you connect the DSC to each 

USB port. You do not see the wizard again unless you connect the DSC to a 
different USB port on your computer. 

• 

Windows 7 and later:

 A pop-up prompt appears on the Windows taskbar 

informing you that Windows is searching Windows Update for USB software. 
If desired, click the USB icon to view the progress of the search. The Driver 
Software Installation window appears:

Figure 5. 

Driver Software Installation Window for USB Software

Close the Driver Software Installation window when installation is finished.

4. 

Windows XP and earlier

: Click 

Next

. On the next screen, make sure that the 

Install

 

the

 

software automatically

 

(Recommended)

 radio button is selected, 

then click 

Next

 (you do not need to insert a disc). Your computer locates the driver 

needed for it to communicate with the DSC via the USB port. 

Figure 6. 

Selecting the Radio Button to Install the USB Driver 
Automatically

 

DSC HD-HD • Installation

7

Содержание DSC HD-HD













































Отзывы:

Нет отзывов