Extron electronics CrossPoint 450 Plus 3248 HV, Руководство пользователя

Страница: 140 / 186

CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
6-2
HTML Operation
The switcher can be controlled and operated through BME 0's LAN port, connected
via a LAN or WAN, using a Web browser such as Microsoft
®
Internet Explorer
®
.
The browser’s display of the switcher’s status or operation has the appearance of
Web pages. This chapter describes the factory-installed HTML pages, which are
always available and cannot be erased or overwritten.
N
If your Ethernet connection to the matrix switcher is unstable, try turning off
the proxy server in your Web browser. In Microsoft Internet Explorer, click
Tools
>
Internet Options
>
Connections
>
LAN Settings
, uncheck the
Use
a proxy server...
box, and then click
OK
.
Downloading the Startup Page
Access the switcher using HTML pages as follows:
1 . Start the Web browser program.
2 . Click in the browser’s Address field.
3 . Enter BME 0's Matrix IP address in the browser’s Address field.
N
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
4 . If you want the browser to display a page other than the default page (such as
a custom page that you have uploaded), enter a slash ( / ) and the file name to
open.
N The browser’s Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{ optional _file_name.html}
N The following characters are invalid in file names:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
5 . Press the keyboard Enter key. The switcher checks to see if it is password
protected.
If the switcher is not password protected, it checks and downloads the HTML
pages (proceed to step 7) .
If the switcher is password protected, the switcher downloads the Enter
Connect To page (figure 6-1).
Figure 6-1
—
Connect To page
N
A User name entry is not required.
6 . Click in the
Password
field and type in the appropriate administrator or user
password. Click the OK button.