1
IMPO
RTAN
T:
IMPO
RTAN
T:
Go to www
.extron.com
for the
complete user guide
, installation
instructions,
and specifications.
AXI 016 • Setup Guide
This guide provides basic instructions for an experienced technician to install the AXI 016 Audio Expansion Interface. The AXI 016
is a pure breakout device that provides 16 line-level outputs for EXP-enabled devices. The AXI 016 is simple to use with no DSP
processing hardware controls. For additional information and specifications, go to
NOTES:
•
EXP-enabled devices are devices that contain an Extron EXP port for routing 16 bidirectional channels of digital audio.
•
In this guide, “EXP-enabled devices” and “EXP devices” are used interchangeably.
Disconnect Power and Mount the AXI 016
Disconnect power from the AXI 016 and power off all devices that will be connected to it. The AXI 016 is housed in a half-rack
width, 6-inch deep, 1U-high metal enclosure that can be rack mounted, set on a rack shelf, or placed on a table with the provided
rubber feet. Select a suitable mounting location, then choose an appropriate mounting option.
Rear Panel Connections
AXI 016
9
10
11
12
1
2
3
4
OUTPUTS
EXP INPUT
POWER
12V
0.7 A MAX
13
14
15
16
5
6
7
8
EXP THRU
PRIMARY
DEVICE
SECONDARY
DEVICE
INPUT
THRU
EXP
AUDIO EXPANSION INTERFACE
AXI 016
CLIP
SIGNAL
1
2
3
4
5
6
7
8
9
10 11 12
OUTPUTS
13 14 15 16
A
B
D
C
A
B
C
Figure 1.
AXI 016 Rear Panel Connections
A
Power Inlet
B
C
EXP Input Port and LED
D
A
12 VDC Power Inlet
— Connect the 12 VDC power supply to the rear panel captive screw power inlet. Then, plug
the power cable into the IEC inlet on the external power supply (see figure 2 and the following
Attention
notices).
Rear Panel
Power Receptacle
DC Power Cord
Captive Screw
Connector
Ground
all devices.
External
Power Supply
12 VDC, 1.5 A max.
– Return
+12 VDC input
Ridged
Smooth
1A MA
X
100-240V 50-60H
z
Figure 2.
Connecting the External Power Supply
ATTENTION:
•
Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory
compliance certification and may cause damage to the supply and the end product.
•
Utilisez toujours une source d’alimentation fournie par Extron. L’utilisation d’une source d’alimentation non autorisée
annule toute conformité réglementaire et peut endommager la source d’alimentation ainsi que l’unité.