1
IMPO
RTAN
T:
Go to www
.extron.com
for the
complete user guide
, installation
instructions,
and specifications.
ACP 105 D • Setup Guide
The Extron ACP 105 D Audio Control Panel is a fully configurable control interface for use with any Extron ACP-enabled device.
Each ACP 105 D includes two ACP ports, which support power and communication between the host device and the ACP 105 D.
Up to eight ACP panels can be used per host device for more demanding control needs.
Planning System Installation
When planning an ACP system installation, consider how many ACP panels to use, maximum cable distance, and mounting (see
the ACP 105 D product page at
for more information regarding the ACP 105 D).
SOURCE 1
SOURCE 2
+V
AC
P
PWR LOAD = 1.5W
+S
-S
G
+V
+S
-S
G
ST
AT
US
GREEN AMBER
RED
LINK COM ERRO
R
ID ERRO
R
SOURCE 3
SOURCE 4
SOURCE 5
A
A
B
B
C
C
D
D
E
E
Figure 1.
ACP 105 D
A
Front Panel Selector Buttons
D
Reset Button
B
ACP Ports (2)
E
Bus ID DIP Switches
C
Connection Status LED
Installation
Step 1: Get Ready
Use the following checklist to prepare for installation:
Download and install the latest software, firmware, and device drivers needed to connect to the host device and
configure the connected ACP devices (see the host device user guide, available at
, for details
regarding software and drivers).
Obtain cables, mounting hardware, and any other supplies required for the installation.