Cable Cubby 650 UT • Installation Guide (Continued)
2
Preparing the Table
Cut a hole in the surface where the enclosure will be installed. The size of the hole depends on the number of enclosures used
(see
cut-out dimensions
on the nex
t
page). Ensure the sides of the hole are smooth after cutting and finished before
installing. Read the following information before making a cut.
Determine the best location for the enclosure
Ensure that the location where the Cable Cubby is to be installed is convenient for as many users as possible.
Ensure that there is ample space under the table for cables. Allow at least 36 inches of cable loop for each cable (see
Routing
and Connecting Cables
on page 7).
When installing Retractors in the Cable Cubby, ensure that there is enough space for the Retractor assembly under the table
or furniture.
22.95"
(583 mm)
26.47"
(672 mm)
21.28"
(540 mm)
12.23"
(311 mm)
9.23"
(234 mm)
30
30
Table Top
Series/2
Series/2
9.0"
(229 mm)
15.14"
(385 mm)
21.14"
(537 mm)
Series/2 XL
Series/2 XL
3.0"
(76 mm)
3.0"
(76 mm)
28.95"
(735 mm)
NOTES:
•
To prevent objects from impeding cable retraction, allow at least 3 inches of clearance from the exposed cable side of
the enclosure (see the diagrams below).
•
Excess cabling may cause clearance issues. Use zip ties to secure under-table cabling to prevent accidental contact or
entanglement (see
Routing and Connecting Cables
on page 7).
