Extremis Captain's chair Скачать руководство пользователя страница 11

MAINTENANCE

SHELL

Use common kitchen cleaning 

products. Avoid using aggressive 

products. These surfaces are best 

cleaned with a neutral cleaning 

product diluted in water.

 

In case of stubborn stains, we 

recommend using a magic sponge. 

POWDER COATED LEGS

Clean with lukewarm water and 

a mild detergent. 

DO NOT USE

 

abrasive scouring powders or 

scourers as they will scratch the 

surface.

STAINLESS STEEL LEGS

Although stainless steel has its own 

oxidation layer protecting the steel 

from rust, it remains necessary 

to regularly remove deposit and 

dirt from the steel with a dry cloth 

and some stainless steel cleaner. If 

damaged, the oxidation layer 

cannot always repair itself 

completely. A maritime climate, 

bleach, acid rain, an aggressive 

industrial or urban environment 

seriously damage the material. They 

determine the frequency and the 

necessity of the surface cleaning. 

The appropriate cleaning products 

are readily available. Steel will 

however only remain rustproof if 

it is covered by the oxidation layer. 

Consequently, you must prevent the 

formation of a permanent layer of 

dirt, especially in case of aggressive 

environmental factors.

CUSHION

First of all, prevent the cushion from 

getting really dirty by storing it 

indoors when not in use.

The best way to clean slightly dirty 

cushions is to use a dry or slightly 

damp cloth. Alternatively, you can 

also use a vacuum cleaner with the 

soft brush attachment. 

Remove stains by immediately 

dabbing them gently with an 

absorbent cloth. Stains on the edge 

of the cushion can be removed by 

gently dabbing with small circular 

movements from the outside 

towards the centre of the stain. Any 

persisting stains can be treated 

with a soft sponge dipped in a 

lukewarm soapy solution. If this 

does not work, you can briefly soak 

the cushion in lukewarm water with 

a stain remover. In any case, we 

recommend that you always test this 

first on a part that is not visible and 

that you always strictly follow the 

manufacturer’s instructions. 

Do not 

use bleach!

Do not launder the cushion in a 

washing machine!

IMPORTANT

Stains should be removed 

immediately with a clean, soft cloth, 

particularly in case of dark-coloured 

liquids such as wine, ink, coffee, 

coke, oil and bird droppings. If 

left to dry, these liquids may cause 

permanent damage!

MAGIC SPONGE

Only use the Miraclean sponge when 

normal cleaning with lukewarm 

water, soft soap and a normal sponge 

isn’t sufficient!

If stubborn stains remain visible 

after treatment according to the 

instructions (see product manual), 

you can use the MiraClean sponge 

provided. Dip the sponge in water 

and rub it over the stain. 

Do not 

rub too hard with this sponge

 as 

this might cause dull patches on a 

surface.

There is 

no need to use cleaning

products

. Water alone is sufficient.

This sponge is made of melamine 

resin and wears away with use. The 

sponge is very easy to use and gives 

results up to   26 times more quickly 

than a traditional microfibre cloth.

The magic sponge gets rid of most   

stubborn stains without extra effort.

Never use this sponge on high-gloss

surfaces as it may cause dull 

patches

.

The magic sponge is the solution for

getting rid of stubborn stains such as

felt-tip pens, grease, scuff marks,

limescale marks or coffee and tea 

stains. The magic sponge can be used 

on tarpaulin fabric, plastic profiles, 

glass, steel, chrome, aluminium, 

porcelain, artificial leather and 

many types of floor.

For more information, contact 

Extremis: [email protected]

english          11

Содержание Captain's chair

































































Отзывы: