1 Remove the ceiling tiles, push and rotate the main mounting bracket onto the T-bar in such a way
that the center angled locking tabs of the main bracket gets attached to the T-bar.
Figure 10: Attaching the main mounting bracket to a T-bar
2 Attach the access point to the main mounting bracket. Hold the AP and rock it back and forth to
ensure it is securely mounted.
3 Replace the tiles.
4 Attach the Ethernet cable’s RJ45 connector to the LAN1 port.
Mounting the AP using the Main Mounting Bracket and KT-135628-01 Adaptor
to a Flat T-bar
Mounting the AP to a suspended or drop ceiling requires the optional adaptor (Universal Mounting Kit
for WLAN APs; # KT- 135628-01). The adaptor requires a flat t-bar and fits a ceiling tile with up to a
0.35” protrusion from the bar.
Installation Process
ExtremeMobility™ AP510i FCC/WR Installation Guide
21
