6
Safety
WARNING
Do not attempt to lift the chest by its side handles using chains, ropes or lifting
devices, if two people cannot lift the chest. Use a forklift placed under the
bottom of the chest if this situation occurs. The side handle may fail, which may
cause personal injury or damage to the product.
Close the cover and lock the drawers before moving this product. The drawers
could come open and make the product unstable and tip, which may cause
personal injury or product damage.
DO NOT stand on this product or lean on the drawers or work top.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip, which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This
may cause personal injury or product damage. Mounting this product to any
vehicle in any manner will void warranty.
DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
DO NOT alter this product in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
To prevent the chest from easily tipping over, fasten the screws and chest
connector to connect the chest and cabinet.
CAUTION
The maximum weight for each drawer should be no more than 75 lbs.
BE CAREFUL when closing the cover. Remove hands before the cover closes
completely to prevent personal injury.
When moving this product, do not pull it. Push the product to prevent personal
injury.
USE THE BRAKES when not moving this product. This will prevent the product
from rolling, which may cause personal injury or product damage.
BE CAREFUL when opening more than one drawer. The product could become
unstable and tip, which may cause personal injury or product damage.
Secure this product properly before moving it with a forklift.
Keep the product on level surfaces. The product could become unstable and tip
if stored or moved on an uneven surface, which may cause personal injury or
product damage.
IMPORTANT: DRAWERS MUST BE CLOSED and TOOL BOX MUST BE
LOCKED USING KEY BEFORE MOVING.
08/16