4
Assembly
Handle Installation
NOTE: Assemble the handle first
to make it easier to move the tool
cabinet.
Simply position the handle over
the holes in the cabinet and attach
with the provided M6x16 hex bolts.
Tighten securely.
Caster Installation
NOTE: You may require the
assistance of another person to
complete this step.
Carefully lay the cabinet on its back,
with a soft mat underneath to protect
the finish.
Position the two swivel casters on
the right side of the cabinet bottom
(on the same side as the handle).
Insert four M8x20 hex bolts through
washers, then through each caster
and into the bottom of the cabinet.
Tighten securely.
Repeat for the two rigid casters on
the other side of the cabinet.
Chest and Cabinet Connection
Place the chest on the cabinet.
Attach the connectors to the chest,
making sure the hook head snaps in
the square hole on the back of the
chest. Fasten the screws provided
to the cabinet.