This will turn off helicopter LED night lights, saving battery
power for longer flight time.
Distributed and Serviced by: Extreme RC by RSI ... Ferndale, MI
Tel: 586-757-1336 x 1 ... E-mail: [email protected]
-pg 4-
Note: Calibration trim control: If the helicopter is turning excessively to the right or left, or
turning out of control, adjust the calibration trim control knob using the instructions below
Turn trim control
knob clockwise
Turn trim control
knob counter-clockwise
If helicopter rotates counter-clockwise
If helicopter rotates clockwise
Lights ON/OFF button
Acceleration button
This is a two speed helicopter. Slow speed for beginners and fast
speed for professionals.
LIGHTS AND HI / LOW SPEED CONTROL
SPARE PARTS
#21 Tail motor
#19 Center pipe
#20 Main motors set
#23 Landing gear
cushions set
#22 PCP board with
ON/OFF switch
#24 Main motor
housing set
#15 Main rotor shaft
#18 Tail pipe with
LED lights
#13 Outer metal
body
#16 Tail motor shaft
#14 Inner metal
body
#17 Tail support bars
#30 Antenna
#28 A/C adapter
#29 Remote control
#25 Li-Poly battery
#26 Battery case
housing
#27 Under carriage
board
#8 Tail blade
#12 Top shaft ball
bearing housing
#9 Landing gear
#11 Shaft bearings
and gear bearings
#10 Main gear set
#7 Body support
connect brackets
#4 Balance bar
#5 Balance bar
connection set
#6 Blade clip set
#3 Tail and top fin
with connectors
#2 Main blades
#1 Head cover
All manuals and user guides at all-guides.com
