Extreme Networks WS-AP3805-FCC/ROW, Руководство по установке, Страница: 15 / 37

Figure 6: AP3805 Installed on the T-bar Rail
Table 8: AP3805 Installed on the T-bar Rail
Item Description
1 T-bar rail
2 T-bar rail connector
5 Line up the connected T-bar rail connectors ( previous figure, item 2 ) with an appropriately sized rail
( previous figure, item 1 ), and press the AP onto the rail until it snaps into place. Verify that the
Ethernet cable that will connect to the AP can reach the AP at the point where you plan to mount it.
6 With both bracket tabs over the T-bar rail lips, tap the AP to verify it is stable and will not fall off.
7 Make a hole through the ceiling panel closest to the power slot on the AP. Run the Ethernet cable
through the hole and into an RJ45 LAN port in the recessed connector bay.
8 Replace the displaced ceiling panels.
Mounting to Solid Wall or Ceiling
Use this procedure to mount the AP to a solid wall or solid ceiling.
Note
If you plan to use ExtremeCloud to manage this AP, scan the QR code before you install the
AP. The QR code is located on the back of the AP and on the box label.
Installation
ExtremeWireless™ WS-AP3805-FCC/ROW Installation Guide 15