manualshive.com logo in svg

Extreme Networks ExtremeWireless AP560h, Руководство по установке, Страница: 10 / 40

Поделиться
Скачать
Extreme Networks ExtremeWireless AP560h Скачать руководство пользователя страница 10

Figure 2: AP560h access point side ports

Callout

Description

A

GE1 port

B

GE2 port

C

Console port

Note
The console port cap must be tightened to a torque of 12 in-lbs.
If a torque wrench is not available, a flat-bladed screwdrive can be used. The flat blade must
be 7/16 in. wide to avoid noticeable cap slot deformation.

Note
The slot deformation will not affect the IP67 console port cap properties.

Turn the console port cap until there is resistance from the access point gasket, and then turn
the console port cap to a minimum of ½ turn further.

Purchase Order Information

Learn how to purchase various brackets and accessories for installing the AP560h access point.

The AP560h access point is sold by itself and cannot be installed without a mounting bracket or an
accessory.

AP560h purchase order information

Part number

Description

AP560h-FCC

Cloud-ready, Dual 5GHz, Dual-band, Sensor radio,

Dual Radio 802.11ax/ac/abgn, 4x4:4 MIMO

Outdoor 11ax access point. Internal 30deg/70deg

Panel Antenna.

Domain: US and Columbia

Purchase Order Information

AP560h Overview

10

ExtremeWireless™ AP560h Access Point

Содержание ExtremeWireless AP560h









































Отзывы:

Нет отзывов