Extreme Networks ExtremeWireless AP4000 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 33

Extreme Networks ExtremeWireless AP4000 Скачать руководство пользователя страница 12

Install the Access Point

Access Point Box Contents

on page 12

Install the Access Point on a Standard Ceiling

Install the Access Point on a Wall or a Solid Surface Using the AH-ACC-BKT-AX-
TB Bracket

Non-Standard Ceiling Grid or Wall Installation

Lock the Access Point after Installation

Details about pre-installation checks and various installation options.

About This Task

The access point can be installed on an indoor environment such as a ceiling rail, on non-standard
ceilings, and on a wall. The access point is shipped with one mounting bracket, but can be used with
other mounting accessories. For more information about selecting the right accessory for your
installation scenario, see

802.11ax and Cloud Access Points Accessories Guide

Procedure

1. Verify the access point

.

2. Visually inspect the access point, the mounting bracket, and any other optional accessories that you

have ordered for physical damage.
If there is any damage, contact

Extreme Networks Support

.

3. Read and review the

safety guidelines

4. Select an access point mounting option:

•

To install the access point on a standard ceiling rail, see

Install the Access Point on a Standard

on page 13.

•

To install the access point on a non-standard ceiling grid or a wall, see

Non-Standard Ceiling Grid

or Wall Installation

5.

Lock the access point

after installation.

Access Point Box Contents

When you purchase the access point, ensure that the following items are available in the box:

•

An AP4000 access point

12

ExtremeWireless™ Indoor Access Point AP4000

«
...
10
11
12
13
14
...
»

Содержание ExtremeWireless AP4000


































Отзывы:

Нет отзывов