Extreme Networks ExtremeWireless AP4000 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 33

Extreme Networks ExtremeWireless AP4000 Скачать руководство пользователя страница 13

•

One mounting bracket for 15/16 in. T-bar ceiling installation (part number AH-ACC-BKT-AX-TB)

Note
The mounting bracket includes wall mounting hardware; two screws and two anchors for
wall installation.

•

One quick reference guide

All optional brackets and accessories are sold separately. For detailed instructions about all mounting
procedures, see

802.11ax and Cloud Access Points Accessories Guide

.

Install the Access Point on a Standard Ceiling

Details about access point installation on a standard ceiling

Before You Begin

Hardware requirements for installation:

•

One AP4000 access point

•

One AH-ACC-BKT-AX-TB bracket

About This Task

The access point ships with the AH-ACC-BKT-AX-TB mounting bracket for standard 15/16 in. dropped
ceiling grid or for 9/16 in. wide and flat T-bar, and for walls or solid surfaces with the appropriate
mounting hardware. For wall or solid surface installation using the AH-ACC-BKT-AX-TB bracket, see

Install the Access Point on a Wall or a Solid Surface Using the AH-ACC-BKT-AX-TB Bracket

For non-standard ceiling rail installations, see

Install the Access Point on a Non-Standard Ceiling Grid or

The bracket and the access point have a red dot on the back that acts as a guide during installation.

To install the access point:

Procedure

1. Remove the ceiling tiles.

Install the Access Point

Install the Access Point on a Standard Ceiling

ExtremeWireless™ Indoor Access Point AP4000

13

«
...
11
12
13
14
15
...
»

Содержание ExtremeWireless AP4000


































Отзывы:

Нет отзывов